90 Zinc Diecast Liquid-Tight Conduit Connectors 3/4"
Item # 88720

90° Zinc Diecast Liquid-Tight Conduit Connectors

  • Available 3/8" through 4"
  • For use with both Metallic Liquid Tight Conduit and Nonmetalic Liquid Tight Type B
  • Zinc construction resists salt water, weak acids, gasoline, alcohol, oil, grease, & common solvents
  • Resistant to outdoor weather conditions
  • No disassembly required. Instead, the installer simply twists the conduit or tubing onto the ferrule, tightening the domed sealing nut. The completed assembly can then be secured in the chassis by the locknut (or first secure the connector into an NPT threaded hole)
  • No threading of the conduit or tubing required to install, eliminating the possibility of cutting the conduit & creating leak paths
  • Complete conduit/connector system is reusable. Conduit will not wind tight onto the connector during assembly & can be easily removed by pulling while turning in a clockwise direction
  • Suitable for indoor/outdoor use; for original equipment manufacturers or field installers
  • Lower installed cost
  • Smooth internal surfaces for easier wire installation around corner angles
  • "O" Ring & zinc locknut included
OR Add to Compare


Trade Size 3/4 "
K.O. Size 3/4 "
Standard Package 100
Weight Per Pkg. 38
Dim. A 2.47 "
Dim. B 2.79 "
Dim. C 0.55 "


  • HVAC equipment
  • Machine tools
  • Marine equipment
  • Motors and controls
  • Printing equipment
  • Pumps
  • Refrigeration equipment
  • Assemblies
  • Wire hook-up