Zinc Die Cast Liquid Tight Connectors

Show Product Details

Available 3/8″ through 4″
For use with both Metallic Liquid Tight Conduit and Nonmetalic Liquid Tight Type B
Zinc die cast construction resists salt water, weak acids, gasoline, alcohol, oil, grease, & common solvents
Resistant to outdoor weather conditions
No disassembly required. Instead, the installer simply twists the conduit or tubing onto the ferrule, tightening the domed sealing nut. The completed assembly can then be secured in the chassis by the locknut (or first secure the connector into an NPT threaded hole)
No threading of the conduit or tubing required to install, eliminating the possibility of cutting the conduit & creating leak paths
Complete conduit/connector system is reusable. Conduit will not wind tight onto the connector during assembly & can be easily removed by pulling while turning clockwise
Suitable for indoor/outdoor use; for original equipment manufacturers or field installers
Lower installed cost
“O” Ring & zinc locknut included

Show Product Details

Item #	Trade Size	K.O. Package	Std Package	Dim. A	Dim. B	Dim. C
88701	3/8 in.	1/2 in.	100	1,58 in.	1,18 in.	0,53 in.
88703	1/2 in.	1/2 in.	100	1,58 in.	1,18 in.	0,53 in.
88705	3/4 in.	3/4 in.	100	1.69 in.	1.57 in.	0.58 in.
88707	1 in.	1 in.	25	2.06 in.	1.81 in.	0.58 in.
88709	1 1/4 in.	1 1/4 in.	25	2.06 in.	2.18 in.	0.61 in.
88711	1 1/2 in.	1 1/2 in.	10	2.09 in.	2.51 in.	0.63 in.
88713	2 in.	2 in.	10	2.15 in.	3.03 in.	0.63 in.
88729	2 1/2 in.	2 1/2 in.	5	3.54 in.	3.68 in.	1.02 in.
88731	3 in.	3 in.	1	4.04 in.	4.38 in.	1.07 in.
88735	4 in.	4 in.	1	4.99 in.	5.54 in.	1.15 in.

Show Product Details

Available 3/8″ through 4″
For use with both Metallic Liquid Tight Conduit and Nonmetalic Liquid Tight Type B
Zinc construction resists salt water, weak acids, gasoline, alcohol, oil, grease, & common solvents
Resistant to outdoor weather conditions
No disassembly required. Instead, the installer simply twists the conduit or tubing onto the ferrule, tightening the domed sealing nut. The completed assembly can then be secured in the chassis by the locknut (or first secure the connector into an NPT threaded hole)
No threading of the conduit or tubing required to install, eliminating the possibility of cutting the conduit & creating leak paths
Complete conduit/connector system is reusable. Conduit will not wind tight onto the connector during assembly & can be easily removed by pulling while turning in a clockwise direction
Suitable for indoor/outdoor use; for original equipment manufacturers or field installers
Lower installed cost
Smooth internal surfaces for easier wire installation around corner angles
“O” Ring & zinc locknut included

Show Product Details

Item #	Trade Size	K.O. Package	Std Package	Dim. A	Dim. B	Dim. C
88716	3/8 in.	1/2 in.	100	2.11 in.	2.53 in.	0.53 in.
88718	1/2 in.	1/2 in.	100	2.24 in.	2.46 in.	0.53 in.
88720	3/4 in.	3/4 in.	100	2.47 in.	2.79 in.	0.55 in.
88722	1 in.	1 in.	25	3.46 in.	3.86 in.	0.58 in.
88724	1 1/4 in.	1 1/4 in.	25	3.37 in.	3.99 in.	0.67 in.
88726	1 1/2 in.	1 1/2 in.	10	4.28 in.	5.04 in.	0.61 in.
88728	2 in.	2 in.	10	4.21 in.	5.06 in.	0.71 in.
88730	2 1/2 in.	2 1/2 in.	1	5.57 in.	7.00 in.	1.03 in.
88732	3 in.	3 in.	1	6.00 in.	7.25 in.	0.99 in.
88736	4 in.	4 in.	1	8.75 in.	10.00 in.	1.17 in.