Manufacturer of flexible hose, liquid-tight conduit and weatherproof electrical products · Elizabeth, New Jersey
Close-up inside a Superflex spiral-reinforced flexible conduit

90° Connectors

  • cULus Listed · E197675
  • Liquid-tight · for LFNC-B conduit

90° Connectors — 14 part numbers, sizes 3/8" to 2", in gray, black.

Part numbers
14
Sizes
3/8" to 2" (7 sizes)
Colours
Gray · Black
Listing
cULus Listed, file E197675
Material
Nylon 6
Pack
10–100 per carton
Catalog
p. 33

Features

  • Listed under the Underwriter's Laboratories
  • Available 3/8 inch through 2 inch
  • All nylon construction resists salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents
  • No disassembly required. Instead, the installer simply pushes the conduit or tubing onto the ferrule, tightening the domed sealing nut. The completed assembly can then be secured in the chassis by the locknut
  • No threading of the conduit or tubing required to install, eliminating the possibility of cutting the conduit and creating leak paths
  • Standard Color: Black or Gray
  • Complete conduit/connector system is reusable. Conduit will not wind tight onto the connector during assembly and can be easily removed by pulling while turning in a clockwise direction
  • Suitable for indoor/outdoor use; for original equipment manufacturers or field installers
  • Lower installed cost
  • Molded of type nylon 6. Flammability classification 94V-2: temperature index 125°C
  • Smooth internal surfaces for easier wire installation around corner angles
  • "0" Ring and steel locknut included
Product Inquiry

Looking for a different non-metallic liquid tight connectors part? See all 42 part numbers in Non-Metallic Liquid Tight Connectors →

Need pricing on 90° Connectors? Send us the part numbers and quantities. Our sales team in Elizabeth, NJ will come back to you with pricing and availability.

Frequently asked about 90° Connectors

Do nylon connectors need a locknut?

Yes. Each connector is supplied with its steel locknut and an O-ring; no separate gasket or flat washer is needed, and we do not offer a flat-washer version. The O-ring seats against the enclosure wall at the knockout and is compressed by tightening the locknut from inside. Hold the fitting still and turn the locknut — spinning the fitting drags the O-ring and is the usual cause of leaks.

Which body should I choose: straight, 45° or 90°?

Use straight where the conduit meets the enclosure square on; 45° and 90° where the conduit has to change direction immediately at the box to avoid a tight bend in the conduit itself.

Are the connectors rated for outdoor use?

Yes. They are cULus Listed for wet locations and UV-stabilised for permanent outdoor exposure.

Still unsure? 1-800-394-3665 or ask our sales team.